Etlin-Daniels.com
Phone: 416-741-7336
1-800-661-9610 (toll-free) | Trusted in Electrical and Lighting Since 1949
0 Items
Select Page

SENPIR-HLB-D – Dimmable High and Low Bay PIR Occupancy Sensor /120V-277V-347V/360˚

The Etlin-Daniels SENPIR-HLB-D is a Wet Location rated, High / Low Bay Passive Infrared Sensor, which can be mounted to both indoor and outdoor luminaires to provide multi-level control, based on both motion and lux settings. It controls both 0-10V LED Dimming Drivers as well as Dimming Ballasts. When motion is detected within the sensor’s set coverage area, the relay in the sensor closes and preset lighting loads are automatically turned on. Reduced Sensor settings can be achieved using just Dip Switches. Expanded settings can be achieved using the Sensor Remote Control – RC-SENPIR-HLB. Please consult the Installation Guide for all available Dip Switch & Remote-Control settings and wiring instructions.

• Wet Location Rated Dimmable Infrared Sensor (please ensure proper ingress protection connections are made).
• High / Low Bay rated – all with same lens.
• Coverage 8-40ft.
• No minimum load requirement.
• White high impact injection molded plastic.
• Remote Control sold separately.
• Remote Control expands setting options over just using Dip Switches.
• May control dimming Halogen / Incandescent, CFL, Fluorescent, HID, LED.

TECHNICAL INFORMATION

COVERAGE RANGE

8' – 40'

INPUT VOLTAGE

AC120V-277V-347V

LOAD REQUIREMENT

800W @ 120VAC
1200W @ 277VAC
1500W @ 347VAC

POWER FREQUENCY

50˜60Hz

CERTIFICATION

, ,

PRODUCT DIMENSIONS

3.58 x 1.54 x 3.58 (INCHES)

SPEC SHEET

INSTRUCTION MANUAL

     

You may also like…