Etlin-Daniels.com
Phone: 416-741-7336
Select Page

SENPIR-CM-02 – Ceiling Mounted PIR Occupancy Sensor/120V – 800W / 277V- 1200 VA – cULus

 The Etlin-Daniels SENPIR-CM-02 Ceiling Mounted PIR Occupancy Sensor is designed to replace a standard light or fan switch. It is ideal for applications including Private Offices, Conference Rooms, Break Rooms, Washrooms, Classrooms, Lounges and Storage Areas. The Etlin-Daniels SENPIR-CM-02 with built in (Auto ON/OFF) detects changes within the infrared given off by occupants as they move around the field-of-view. When occupancy is detected, the self-contained relay, switches the lighting load on. The sensor is line powered and can switch line voltage.  Windows, Glass Doors, and other transparent barriers may obstruct the sensor’s view and prevent detection

Windows, Glass Doors, and other transparent barriers may obstruct the sensor’s view and prevent detection
Time Delay Adjustment – Fixed 15 seconds to 30 minutes
Tools required for installation – Insulated Screwdriver and Wire Strippers
• Ceiling Mounted PIR Occupancy Sensor
Auto ON/OFF
PIR Timer is Programmable from 15sec to 30mins
White Plastic Construction
•.
12ft to 18ft (3.65m to 5.48m) mounting heights
12ft to 24ft (3.65m to 7.31m) radial coverage
Radial Coverage Overlaps area lit by typical Fixture
• The coverage area is measured under best temperature conditions +20°C – +25°C (+68°F – +77°F).
A higher temperature may not lead to an ideal coverage.
Coverage Range – Up to 18 ft mounting – 360 Degrees
• 3 year warranty

TECHNICAL INFORMATION

INPUT VOLTAGE

AC120V˜277V

LOAD REQUIREMENT

120V˜800W incandescent lamp
800VA fluorescent lamp
277V˜1200VA fluorescent lamp

POWER FREQUENCY

60Hz

CERTIFICATION

PRODUCT DIMENSIONS

4.49 x 4.49 x 1.29 (INCHES)

SPEC SHEET

INSTRUCTION MANUAL