60.25PLG – Type P – Slotted Wire Duct Raceway with Cover – 4 mm Slot Width – 6 mm Slot to Slot Center line -2 Meters Length – 60 mm x 25 mm – Screw or Rivet Mounting – cURus
Used primarily in control panels. By deflecting the plastic fingers, wires can be added or removed, but the restricted opening design prevents the accidental removal of the wires. Smooth edges ensure worker comfort and safety.
• Non-Slip Cover: Remains in place even under heavy vibration, but is easily snapped on or off to access the wires.
• Mounting Holes: Are elongated, which allows for more tolerance when drilling holes on the mounting surface. These holes allow for a wide range of fastening hardware to be used.
• Double Scored Walls: Can be broken at the upper score line by bending the finger by hand. The lower score line can be used to make corner or T-junctions.
• Restricted Slot Design: By deflecting the individual finger, wires can easily be positioned in the duct. This design also helps prevent the accidental removal of wires. Wires can be snapped out of the duct when tracing wires without disconnecting.
30.25P – 1.18″ H x .98″W
40.25P – 1.57″ H x .98″W
60.25P – 2.36″ H x .98″W
80.25P – 3.15″ H x .98″W
40.40P – 1.57″ H x 1.57″W
60.40P – 2.36″ H x .157″W
80.40P – 3.15″ H x 1.57″W
40.60P – 1.57″ H x 2.36″W
60.60P – 2.36″ H x 2.36″W
80.60P – 3.15″ H x 2.36″W
80.80P – 3.15″ H x 3.15″W
80.100P – 3.15″ H x 3.94″W
100.100P – 3.94″ H x 3.94″W
60.120P – 2.36″ H x 4.72″W
80.120P – 3.15″ H x 4.72″W
Standard length is 2 meters or 6’6″ long, supplied with the cover.
Standard colour is Light Grey or White. Add suffix –LG for Light Grey or -WH for White to the part number.